Concrete Washout Pan Rental in Denver
- Flat-Rate Swaps: Full swap-and-haul service is a flat $300 per pan inside the Denver C-470 loop.
- Zero Contracts: Rent by the day, week, or 4-week billing cycle with no long-term lease obligations.
- Two Steel Capacities: Choose between the 14-inch low-profile 310-gallon pan for direct mixer/pump dumping or the 24-inch 441-gallon pan for high-volume commercial pours.
- CDPHE and EPA Compliance: Fully watertight, rigid steel units replace makeshift lined pits to eliminate the risk of an illicit discharge into municipal storm sewer systems.
- Live Phone Quotes: Dispatch phone lines are open 24/7 for quotes at (720) 734-9337.
Denver Jobsite Washout Compliance and Logistics
Managing concrete trades on commercial jobsites along the I-25 and I-70 corridors across Denver requires tight environmental control. Between the City and County of Denver’s strict stormwater quality regulations and the Colorado Department of Public Health and Environment (CDPHE) Water Quality Control Division permits, uncontained washout water is an immediate liability. Concrete washout carries a corrosive pH often exceeding 12.0, loaded with dissolved solids and residual chemical admixtures. Allowing washout slurry to reach unpaved ground or an impervious surface draining toward a municipal storm inlet constitutes an illicit discharge under local municipal separate storm sewer system (MS4) rules.
For a general contractor superintendent, digging an earthen pit lined with 10-mil plastic sheeting is rarely a viable long-term strategy. Compact Denver infill parcels leave little clearance between property lines, excavation shoring, and staging lanes. Pits tear under pump truck discharge, leak corrosive slurry through subgrade soils, and create significant mud tracking across sidewalks. When you need to keep trades cycling through footings, columns, and elevated deck pours without failing a stormwater inspection, you need an engineered containment unit you can order, use, and swap out without stopping work on site.
Reborn Rental provides engineered steel washout containers across the Denver metro area on a direct drop-use-swap schedule. One phone call places a watertight container precisely where your subcontractors discharge their equipment. When you rent concrete washout pans from our fleet, you offload the hauling, containment risk, and physical waste removal entirely.
Pan Selection: Discharge Method Determines Specification
Choosing the correct container depends primarily on the discharge method your concrete placement subcontractors use on site. Placing an excessively tall container under a low-clearance discharge point forces pump operators and ready-mix drivers to wash down onto the ground before shoveling residue into the pan. We supply two distinct sizes to match specific pour geometry and volume requirements.
310-Gallon Low-Profile Pan
The 310-gallon Small washout pan measures 72 inches wide by 72 inches long with a low 14-inch sidewall height. This low-profile geometry is engineered explicitly for rear-hopper clearance. Ready-mix trucks, trailer line pumps, and large boom pumps can back up directly to the unit and dump concrete slurry directly into the steel bin without requiring ramps, pits, or extra transition chutes.
This container fits tight urban building footprints throughout Downtown Denver, RiNo, and Cherry Creek where space between the structure and pedestrian barriers is limited. It provides adequate capacity for multiple truck chutes and pump washouts while maintaining a low center of gravity and easy hookups for crane rigging on elevated deck pours.
441-Gallon High-Capacity Pan
The 441-gallon Large washout pan shares the same 72-inch by 72-inch footprint but features an extended 24-inch wall height. This model holds 441 gallons of wet concrete slurry and wash water, making it the primary specification for continuous, high-volume structural pours, large foundation mats, and projects with high truck counts cycling through the gate.
General contractors running multi-trade sites favor the 441-gallon Large washout pan because it maximizes the operating time between hauls. Finishing crews can clean out wheelbarrows, a hand float, a bull float, and screeds simultaneously alongside ready-mix trucks without overflowing the rim. Where crane access or elevated hoists allow, the deep walls provide additional freeboard to prevent liquid splash during crane lifts.
How It Works: Drop, Use, Swap
Our operational model runs on a simple three-step cycle designed to remove equipment maintenance and disposal logistics from your site team’s daily checklist.
- Drop: We deliver a clean, watertight steel pan directly to your designated site staging area. Placement is coordinated to provide direct access for concrete deliveries while keeping clear of fire lanes, loading docks, and primary trade traffic routes.
- Use: Concrete trades wash out chutes, hoppers, line hoses, and masonry tools directly into the pan. Watertight steel containment prevents contact with site soils, aggregate base course, or storm drains, maintaining strict site BMP (Best Management Practice) compliance.
- Swap: When the container approaches capacity, you notify our dispatch team. Our dedicated delivery truck arrives with a fresh, empty pan, places it on site, hooks the full unit, and hauls the waste material away.
By utilizing our scheduled concrete washout swap and disposal service, your site maintains continuous washout capacity without trade downtime, messy pit cleanouts, or secondary contamination risks.
Transparent Pricing Inside the C-470 Loop
Denver project managers and estimators need predictable numbers without variable disposal surcharges or hidden environmental fees buried in monthly billings. We maintain simple, standardized pricing across our entire fleet.
Rental Rates
- 310-Gallon Pan: $26 per day | $140 per week | $532 per 4-week cycle
- 441-Gallon Pan: $29 per day | $175 per week | $588 per 4-week cycle
Swap and Haul Fees
Within the C-470 outer loop, every pan swap is billed at a flat rate of $300. This flat rate covers pickup of the loaded container, site placement of the replacement unit, transport, and off-site handling. If your jobsite sits outside the C-470 boundary, standard transit is calculated at the flat rate plus $8.99 per mile beyond the loop. Projects requiring delivery runs exceeding 200 miles are quoted directly by our logistics team as dedicated long-haul service.
There are no long-term lease contracts. If your foundation sub finishes footings in four days, you are billed only for those days and the swap fee. For complete details regarding access fees, waiting time, or after-hours logistics, review our standard schedule of fees and surcharges.
Denver Metro Service Footprint and Site Access
Our operations dispatch across all central and surrounding Denver districts. Whether your project is an infill redevelopment in LoDo, commercial tilt-up work near Denver International Airport, infrastructure along Central Park Blvd, or campus builds near the Denver Tech Center, we schedule rapid deployment across the entire C-470 perimeter.
We also serve surrounding Front Range cities including Lakewood, Aurora, Arvada, Westminster, Thornton, Commerce City, Wheat Ridge, Golden, Littleton, Englewood, and Centennial. Routine deliveries and pan swaps run during standard operating hours, Monday through Friday, 9:00 AM to 6:00 PM Mountain Time. When critical schedules dictate early-morning access, weekend pours, or after-hours staging, self-pickup and drop-off can be arranged with advance notice for a nominal $35 after-hours fee.
Frequently Asked Questions
How much does concrete washout pan rental cost inside Denver’s C-470 loop?
Rental rates depend on the pan specification you select. The 310-gallon low-profile pan rents for $26 per day, $140 per week, or $532 per 4-week cycle. The 441-gallon high-capacity pan rents for $29 per day, $175 per week, or $588 per 4-week cycle. Every swap-and-haul service visit within the C-470 loop is billed at a flat $300 per pan.
Can a general contractor rent without signing a long-term contract?
Yes. We operate with no long-term contract requirements. You rent containers strictly for the duration required by your construction schedule, whether that spans three days for utility vault pours or six months for a ground-up high-rise build.
What are your operating hours and how do I get a quote?
Our yard and delivery operations run Monday through Friday from 9:00 AM to 6:00 PM Mountain Time. Live phone quotes are available 24/7 by calling (720) 734-9337.
How far do you deliver from Denver?
We deliver throughout the Front Range. Deliveries inside the C-470 loop carry a flat $300 swap rate. Projects located beyond the C-470 loop are billed at $8.99 per mile from the loop perimeter. Hauls exceeding 200 miles are handled via dedicated custom quotes.
What payment methods do you accept?
We accept all major credit cards, ACH transfers, Klarna, Apple Pay, and Google Pay. We do not accept cash payments.
What is your cancellation policy?
Cancellations are free up to 5 business days before your scheduled delivery date. Cancellations made after that window incur a fee equal to 50% of the reservation value, excluding delivery fees.
Can I pick up or drop off a pan outside of regular working hours?
Yes. Self-pickup or drop-off outside of our standard operating hours (Monday through Friday, 9:00 AM to 6:00 PM Mountain) is available with advance notice for a $35 after-hours fee.
How can I track my delivery?
To check on delivery status, contact support by phone or text with your Order ID to receive real-time driver updates.
Secure Washout on Your Denver Jobsite
Keep your trade partners pouring and your stormwater inspection logs clean with watertight steel containment on site. Need one on site? Call for a live quote at (720) 734-9337 — we’ll text you the link before you hang up.
