SWPPP Heat Map for Colorado
Description
Illustrative Colorado-oriented view of where stormwater and SWPPP expectations often tighten—use as a conversation starter, not legal advice.
OpenRegulations
Colorado SWPPP heat map plus county-by-county concrete washout checklists for supers and estimators. Always confirm with your permit authority.
Description
Illustrative Colorado-oriented view of where stormwater and SWPPP expectations often tighten—use as a conversation starter, not legal advice.
OpenDescription
Denver DOTI inspectors aggressively enforce the Municipal Separate Storm Sewer System (MS4) guidelines. If you are pouring in Denver County, your washout setup must meet these specific municipal codes to avoid Stop-Work Orders.
OpenDescription
Jefferson County is highly protective of its water quality and storm sewer systems, which discharge directly into state waters. The county actively enforces illicit discharge rules and strict Right-of-Way (ROW) policies. If you are managing concrete washout in JeffCo, your setup must meet these exact criteria.
OpenDescription
Boulder County enforces some of the strictest environmental and stormwater codes in Colorado. Requirements are dictated by the Keep It Clean Partnership and the Boulder County Storm Drainage Criteria Manual (SDCM). If you are pouring in Boulder County, your setup must meet these exact criteria.
OpenDescription
City borders) Adams County has heavily codified its erosion and sediment control standards, particularly regarding illicit discharges in its industrial and rapidly developing corridors. If you are managing concrete washout in Adams County, your site must adhere to the specific mandates listed in the county's official E...
OpenDescription
Enforcement Response Plan If you are managing concrete washout within Arapahoe County, including the Centennial and SEMSWA service areas, you are operating under a highly structured Enforcement Response Plan (ERP). SEMSWA acts as the MS4 permit manager and explicitly targets concrete washout compliance.
OpenDescription
El Paso County coordinates stormwater regulations heavily with the City of Colorado Springs. The county adopted the City of Colorado Springs Drainage Criteria Manual Volume 2 (DCMV2) as its baseline for stormwater quality, modified by Appendix I of the County Engineering Criteria Manual (ECM). If you are managing concr...
OpenDescription
Tree) Sediment Control (GESC) Program Douglas County operates under strict Grading, Erosion, and Sediment Control (GESC) permitting. Municipalities within the county, such as Lone Tree, formally adopt the Douglas County GESC Manual into their municipal codes (e.g., Section 15-1-30) to regulate construction runoff.
OpenDescription
(SWMP) Broomfield operates under a consolidated City and County MS4 permit. Because Broomfield sits at the intersection of several rapidly developing tech and residential corridors, inspectors strictly enforce state-level phased compliance and Urban Drainage and Flood Control District (now MHFD) design criteria for all...
OpenDescription
Firestone, and Erie) Weld County operates a strict Construction Sites Program coordinated between its Planning and Public Works departments to meet Colorado Discharge Permit System (CDPS) requirements. The county enforces highly specific thresholds for material management and BMP modifications.
OpenDescription
Larimer County overhauled its stormwater program in 2023, implementing a strict Land Disturbance Permit (LDP) system for its MS4 boundary. Construction within this jurisdiction, heavily influenced by the shared Larimer County Urban Area Street Standards (LCUASS), requires precise concrete washout containment.
OpenDescription
Pueblo County tightly regulates its MS4 program through local ordinances designed to abate conditions that cause or contribute to illicit discharges. The county coordinates heavily with the City of Pueblo, utilizing a shared set of updated stormwater criteria. If you are pouring in the Pueblo region, inspectors verify...
OpenDescription
Summit County operates in a highly sensitive, high-altitude alpine environment. The Engineering Department administers strict grading, excavation, and stormwater regulations through Chapter 6 of the Summit County Land Use and Development Code. Due to the short building season and steep terrain, inspectors scrutinize si...
OpenDescription
Junction Drainage District) Manual (SWMM) Stormwater management in the Grand Valley is unique due to the consolidation of several municipalities. Mesa County, Grand Junction, Fruita, Palisade, and the Grand Junction Drainage District contracted through intergovernmental agreements to form the 5-2-1 Drainage Authority....
OpenDescription
(Article 4) Operating in Eagle County requires navigating strict alpine stormwater regulations, driven by the proximity to the Eagle River watershed and extreme seasonal snowmelt. The county enforces rigorous site development and engineering criteria for all construction materials and BMPs.
OpenDescription
Operating in Routt County and the City of Steamboat Springs requires navigating extreme winter weather windows and rigorous protections for the Yampa River watershed. Site superintendents must adhere to the county's Grading & Excavating (G&E) rules and the city's mandatory CSMP standard notes.
OpenDescription
Operating in Garfield County means your site is heavily scrutinized for its impact on the Roaring Fork and Colorado River watersheds. County regulations are highly protective of native topography and vegetation, strictly regulating any temporary earthwork through their Community Development Department.
OpenDescription
areas) Operating in San Miguel County requires navigating some of the tightest logistical spaces in Colorado, bounded heavily by the San Miguel River watershed. The county strictly enforces state-level protections on an extreme local level to protect alpine riparian zones and wetland habitats.
OpenDescription
Operating in La Plata County, specifically within the City of Durango limits, requires adherence to strict Animas River watershed protections. City Code Enforcement and the county building division enforce rigorous site staging rules that differ significantly from standard state MS4 baselines.
OpenDescription
Operating in Clear Creek County means navigating extremely steep canyon topography and rigid protections for the Clear Creek watershed. Because the county has a history of mining-related water quality issues, their Site Development Department is exceptionally strict regarding excavation, grading, or alkaline pollutants...
OpenDescription
Operating in Gilpin County requires navigating extreme alpine topography, historic mining claims, and highly sensitive environmental clean-up zones. The Department of Community Development strictly regulates earthwork and site access to prevent erosion and runoff of alkaline pollutants into the North Clear Creek waters...
OpenDescription
Operating in Grand County and the Fraser Valley means adhering to strict alpine environmental protections, specifically regarding the Fraser River and Colorado River headwaters. Winter Park, Fraser, and Granby use a consolidated Building Division, so concrete washout requirements are standardized across these resort mu...
Open